Computer Done!

DSM · 06-26-2008, 07:28 PM

Finaly Built, using it right now:

Q9450 @ 3.0GHZ
OCZ 2000mhz DDR3
EVGA GTX 280
Velociraptor HDD 10K RPM
790i Ultra MoBo
Coolermaster 700W PSU
Antec 900
Thermaltake 120 Xtreme

Memory is only running at 1600mhz stable, will not run at 2000mhz specs. Any ideas?

Riku · 06-26-2008, 11:47 PM

Give ocz a message on your setup, i'm sure they can help you out. Or you can try here OverclockersClub Forums a few OCZ rep's are members of this forum.

skimike · 06-27-2008, 07:12 AM

Can you post the exact model of OCZ memory that you're using? Are you using the "2GB (2x1024) D/C Kit PN - OCZ3FXT20002GK" kit? If so, have you manually set your timings to 8-8-8-8-28 1.9 and made sure the memory unlinked? Which 790i motherboard are you using? The eVGA board?

Make sure you're on the latest BIOS for the 790i. It can make a huge difference in memory support and performance. Also, make sure you try slots 0-2 and slots 1-3. People have seen different results depending which pair of slots they've been using.

JacobZ · 06-30-2008, 11:43 PM

Omg this is a ridiculous computer youshould give me your old rig

DSM · 07-01-2008, 12:24 AM

Nvm memory running stable at 2K mhz now. Simply had to change the slots it was in.

Lol you can't have it. It runs anythin throw at it.

Cyroth · 07-01-2008, 03:35 AM

pleeeeeease clock that cpu more

06-26-2008, 07:28 PM	#1 (permalink)
DSM Daeva Join Date: Feb 2008 Character: DSM Class: Assassin Race: Asmodians	Computer Done! Finaly Built, using it right now: Q9450 @ 3.0GHZ OCZ 2000mhz DDR3 EVGA GTX 280 Velociraptor HDD 10K RPM 790i Ultra MoBo Coolermaster 700W PSU Antec 900 Thermaltake 120 Xtreme Memory is only running at 1600mhz stable, will not run at 2000mhz specs. Any ideas? __________________ "Three letters to rule them all... D S M" Last edited by DSM; 06-26-2008 at 07:33 PM..

07-01-2008, 12:24 AM	#5 (permalink)
DSM Daeva Join Date: Feb 2008 Character: DSM Class: Assassin Race: Asmodians	Nvm memory running stable at 2K mhz now. Simply had to change the slots it was in. Lol you can't have it. It runs anythin throw at it. __________________ "Three letters to rule them all... D S M"

07-01-2008, 03:35 AM	#6 (permalink)
Cyroth Daeva Join Date: Feb 2008 Location: England Race: Asmodians	pleeeeeease clock that cpu more __________________ The 5th Soliloquy Q6600 2.4ghz @ 3.3ghz \| Asus P5Q Deuluxe \| Sapphire HD 4850 650/1025 G.Skill 2GB DDR2 PK PC2-8500C5 \| Antec 900 \| WDC 250gb

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-26-2008, 11:47 PM	#2 (permalink)
Riku Daeva Join Date: May 2008 Legion: CapedNudist Race: Asmodians	Give ocz a message on your setup, i'm sure they can help you out. Or you can try here OverclockersClub Forums a few OCZ rep's are members of this forum.

06-27-2008, 07:12 AM	#3 (permalink)
skimike Daeva Join Date: Nov 2006 Race: Undecided	Can you post the exact model of OCZ memory that you're using? Are you using the "2GB (2x1024) D/C Kit PN - OCZ3FXT20002GK" kit? If so, have you manually set your timings to 8-8-8-8-28 1.9 and made sure the memory unlinked? Which 790i motherboard are you using? The eVGA board? Make sure you're on the latest BIOS for the 790i. It can make a huge difference in memory support and performance. Also, make sure you try slots 0-2 and slots 1-3. People have seen different results depending which pair of slots they've been using.

06-30-2008, 11:43 PM	#4 (permalink)
JacobZ Human Join Date: Apr 2008 Race: Elyos	Omg this is a ridiculous computer youshould give me your old rig

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

User Name	Password
Remember Me? ⋅ Register \| Forgot?